| SITRANS P280 Pressure Measurement The SITRANS P280 is a WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultralow power consumption. The compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.Accuracy± 0.25 % of full scale; max ± 0.35 % of full scaleLong-Term Stability≤ 0.25 % / 12 monthsMeasuring range0 -2 bar (0 – 29 psi) to 0 – 400 bar (0- 5800 psi) BenefitsVarious pressure ranges available (2,10, 50, 200, 400 bar)LCD display with functional display items and icons, English and German display selectablePractical push buttons: Three push buttons for maximum efficiency for setup, diagnostics, communication and security settings with no additional devices or toolsMaintenance-friendly backlight functionSleep mode for efficient battery life managementBattery status display on LCD and in network overviewPrecise measurement accuracy for more productivity90 and 180 degree display turnableConfigurable with standard tools supporting EDD – e. g. with SIMATIC PDMPhysical HART maintenance port for commissioning |
| SITRANS P250 Pressure Measurement The SITRANS P250 is a compact single range transmitter for measuring differential pressure. The differential pressure will be detected with a ceramics sensor and tranformed into an output signal of 4–20-mA- resp. 0-5-V- resp. 0–10-V. The version with 0-10 V output signal can be connected directly to the LOGO!24 process controller.Accuracy≤ 1 %Long-term stability≤ 0.5 % / 12 monthsMeasuring range0 – 100 mbar (0 – 40 inchH2O) to 0 – 25 bar (0 – 363 psi)BenefitsConnection and housing of high-grade steel 1.4305Ceramic diaphragm |
| SITRANS P200/P210/P220 Pressure Measurement The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal. Nonlinearity ≤ 0,25 % Long-term stability ≤ 0,25% / 12 Monate Measuring range SITRANS P200: 1 bar to 60 bar gauge 0,6 bar to 16 bar absolute SITRANS P210: 100 mbar to 600 mbar gauge SITRANS P220: 2,5 bar to 600 bar gaugeBenefitsHigh measuring accuracyRugged stainless steel enclosureHigh overload withstand capabilityFor aggressive and non-aggressive mediaFor measuring the pressure of liquids, gases and vaporsCompact design |
| SITRANS P300 Pressure Measurement The SITRANS P 300 offers the measuring precision and ruggedness already known from the SITRANS P DSIII.Its stainless steel housing with laser-printed nameplate, together with a wide range of hygienic process connections, mean that it is highly suitable for use in the food & beverages industry as well as for pharmaceutical processes. With a maximum deviation in measurement of 0.075% and the proven operating philosophy, it fits seamlessly into the SITRANS P family. Accuracy≤ 0,075% Long term stability≤ 0.25% / 60 months Measuring range0 – 10 mbar (0 – 4 inchH2O) to 0 – 400 bar (0 – 5800 psi) BenefitsWith hygiene (EHEDG, 3A), material and calibration certificates emi- nently suited to the food and beverage and pharmaceutical industryEspecially suitable for degrees of protection to IP68 and IP69K, CIP/SIP cleaning, and high-viscosity measuring processMeasurement cells for gauge and absolute pressureMeasurement cells with flush mounted diaphragmExtended simulations and diagnostic functions Parameters can easy set via three local push buttons and LCD display, HART or PROFIBUS PA profile 3.0 communication. >>> For Detail, Please download the brochure & the Catalogue. |
| SITRANS P280 Pressure Measurement The SITRANS P280 is a WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultralow power consumption. The compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.Accuracy± 0.25 % of full scale; max ± 0.35 % of full scaleLong-Term Stability≤ 0.25 % / 12 monthsMeasuring range0 -2 bar (0 – 29 psi) to 0 – 400 bar (0- 5800 psi) BenefitsVarious pressure ranges available (2,10, 50, 200, 400 bar)LCD display with functional display items and icons, English and German display selectablePractical push buttons: Three push buttons for maximum efficiency for setup, diagnostics, communication and security settings with no additional devices or toolsMaintenance-friendly backlight functionSleep mode for efficient battery life managementBattery status display on LCD and in network overviewPrecise measurement accuracy for more productivity90 and 180 degree display turnableConfigurable with standard tools supporting EDD – e. g. with SIMATIC PDMPhysical HART maintenance port for commissioning |
| SITRANS P250 Pressure Measurement The SITRANS P250 is a compact single range transmitter for measuring differential pressure. The differential pressure will be detected with a ceramics sensor and tranformed into an output signal of 4–20-mA- resp. 0-5-V- resp. 0–10-V. The version with 0-10 V output signal can be connected directly to the LOGO!24 process controller.Accuracy≤ 1 %Long-term stability≤ 0.5 % / 12 monthsMeasuring range0 – 100 mbar (0 – 40 inchH2O) to 0 – 25 bar (0 – 363 psi)BenefitsConnection and housing of high-grade steel 1.4305Ceramic diaphragm |
| SITRANS P200/P210/P220 Pressure Measurement The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal. Nonlinearity ≤ 0,25 % Long-term stability ≤ 0,25% / 12 Monate Measuring range SITRANS P200: 1 bar to 60 bar gauge 0,6 bar to 16 bar absolute SITRANS P210: 100 mbar to 600 mbar gauge SITRANS P220: 2,5 bar to 600 bar gaugeBenefitsHigh measuring accuracyRugged stainless steel enclosureHigh overload withstand capabilityFor aggressive and non-aggressive mediaFor measuring the pressure of liquids, gases and vaporsCompact design |
