Highly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs
The Prosonic 92F combines a loop-powered transmitter with an inline sensor in a rugged industrial design. It offers easy system integration and accuracy at an attractive price. Prosonic 92F is ideally suited for the chemical and petrochemical industries.
Benefits
- Safe design for process industries – international hazardous area approvals
- No additional pressure loss – full bore design
- Process transparency – diagnostic capability
- Easy installation and reduced installation costs – loop-powered transmitter
- Fully industry compliant – IEC/ATEX/FM/CSA/TIIS/ NEPSI
- Automatic recovery of data for servicing
Field of application
- The measuring principle is independent of pressure, density, temperature, conductivity and viscosity
- Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.
Device properties:
- Full compliance according to NACE MR0175 and MR0103
- Nominal diameter: DN 25 to 300 (1 to 12″)
- Medium temperature: –40 to 200 °C (–40 to 392 °F)
- Device in compact or remote version
- 2-line backlit display with push buttons
- HART, PROFIBUS PA, FOUNDATION Fieldbus
Measuring Principle | Ultrasonic flow |
Product headline | Loop-powered volume flow meter for measurement of standard liquid applications |
Sensor features | Hazardous area approved |
Nominal diameter range | DN 25…300 1″…12″ |
Max. measured error | +/- 0.5% o.r. +/- 0.01% o.f.s. for v > 0.5 m/s (optional 0.3% o.r.) v <0.5 m/s Reynolds number > 10.000 |
Measuring range | 0…2400 m3/h, 0…10600 gal/min |
Max. process pressure | PN 40 Cl 300 |
Medium temperature range | -40…200°C / -40…392°F |
Degree of protection | IP67 NEMA 4X |
Display/Operation | Two line Touch control |
Outputs | 4…20mA Impulse Status |
Digital communication | HART PROFIBUS PA FOUNDATION Fieldbus |
Hazardous area approvals | ATEX FM CSA TIIS |