Proline Promag 10P
Electromagnetic Flow Measuring System
Flow measurement of liquids in chemical or process applications
Electromagnetic flowmeter for bidirectional
measurement of liquids with a minimum
conductivity of ≥ ۵۰ μS/cm:
• Acid, alkalis
• Paints
• Pastes
• Water, wastewater etc.
• Flow measurement up to 9600 m³/h (42268 gal/min)
• Fluid temperature up to +130 °C (266 °F)
• Process pressures up to 40 bar (580 psi)
• Lengths in accordance with DVGW/ISO
Application-specific lining material:
• PTFE
Your benefits
Promag measuring devices offer you cost-effective flow
measurement with a high degree of accuracy for a wide
range of process conditions.
The uniform Proline transmitter concept comprises:
• High degree of reliability and measuring stability
• Uniform operating concept
The tried-and-tested Promag sensors offer:
• No pressure loss
• Not sensitive to vibrations
• Simple installation and commissioning
Measuring system The measuring system consists of a transmitter and a sensor.
Two versions are available:
• Compact version: Transmitter and sensor form a mechanical unit.
• Remote version: Sensor is mounted separate from the transmitter.
Transmitter:
• Promag 10 (key operation, two-line, unilluminated display)
Sensor:
• Promag P (DN 25 to 600 / 1 to 24″)
Measured variable Flow velocity (proportional to induced voltage)
Measuring ranges Measuring ranges for liquids
Typically v = 0.01 to 10 m/s (0.03 to 33 ft/s) with the specified accuracy
Supply voltage (power supply) • ۸۵ to 250 V AC, 45 to 65 Hz
• ۲۰ to 28 V AC, 45 to 65 Hz
• ۱۱ to 40 V DC
Cable entry Power supply and signal cables (inputs/ outputs):
• Cable entry M20 × ۱.۵ (۸ to 12 mm / 0.31 to 0.47″)
• Thread for cable entries, ½” NPT, G ½”
Connecting cable for remote version:
• Cable entry M20 × ۱.۵ (۸ to 12 mm / 0.31 to 0.47″)
• Thread for cable entries, ½” NPT, G ½”
