Proline Promag 10D Electromagnetic flowmeter

Proline Promag 10D Electromagnetic flowmeter

You are currently viewing Proline Promag 10D Electromagnetic flowmeter

The highly cost-effective flowmeter designed as compact wafer version

Promag D, the wafer device is designed for all applications where space is at a minimum. Combined with the Promag 10 transmitter for basic applications and direct integration, Promag 10D offers accurate measurement of liquids for a wide range of applications. It will be the preferred solution for customers in the water industry aiming for minimized cost of ownership. Promag 10D is available in a compact or remote version.

Benefits

  • Easy, fast centering of the sensor – innovative housing construction
  • Energy-saving flow measurement – no pressure loss due to cross-section constriction
  • Cost-effective – designed for easy applications and direct integration
  • Safe operation – display provides easy readable process information
  • Fully industry compliant – IEC/EN/NAMUR
  • Maintenance-free – no moving parts

Field of application

  • The measuring principle is virtually independent of pressure, density, temperature and viscosity
  • For basic water applications; optimized for limited space and plastic pipe installations.

Device properties

  • Short installation length and low weight
  • Integrated ground disks made of stainless steel
  • International drinking water approvals
  • 2‐line display with push buttons
  • Device in compact or remote version
  • HART
Measuring PrincipleElectromagnetic
Product headlineThe highly cost‐effective flowmeter, available as compact wafer. For basic water applications; optimized for limited space and plastic pipe installations.
Sensor featuresEasy, fast centering of the sensor – innovative housing construction. Energy‐saving flow measurement – no pressure loss due to cross‐section constriction. Maintenance‐free – no moving parts. Short installation length and low weight. Integrated ground disks made of stainless steel.
Transmitter featuresCost‐effective – designed for easy applications and direct integration. Safe operation – display provides easy readable process information. Fully industry compliant – IEC/EN/NAMUR. 2‐line display with push buttons. Device in compact or remote version.
Nominal diameter rangeDN 25 to 100 (1 to 4″)
Wetted materialsLiner: Polyamide
Electrodes: 1.4435 (316L)
Measured variablesVolume flow
Max. measured errorVolume flow: ±0.5 % o.r. ± 2 mm/s (±0.5 % o.r. ± 0.08 in/s)
Measuring range9 to 4700 dm3/min (2.5 to 1250 gal/min)
Max. process pressurePN 16, Class 150, 10K
Medium temperature range0 to +60 °C (+32 to +140 °F)
Ambient temperature range–20 to +60 °C (–4 to +140 °F)
Sensor housing materialAlSi10Mg, coated
Sensor connection housing: AlSi10Mg, coated
Transmitter housing materialPowder‐coated die‐cast aluminum
Degree of protectionCompact version: IP66/67, type 4X enclosure
Sensor remote version: IP66/67, type 4X enclosure
Transmitter remote version: IP67, type 4X enclosure
Display/Operation2‐line display with push buttons
Configuration via local display and operating tools possible
Outputs4‐20 mA HART (active)
Pulse/switch output (passive)
InputsNone
Digital communicationHART
Power supplyDC 11 to 40 V
AC 85 to 250 V (45 to 65 Hz)
AC 20 to 28 V (45 to 65 Hz)
Hazardous area approvalsFM
CSA
Other approvals and certificatesCalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR
Drinking water approval: ACS, KTW/W270, NSF 61, WRAS BS 6920

Leave a Reply

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.